Rotary drilling rigs – Various
| ID-No (more details and pictures) |
DESCRIPTION | NOTE |
| 2165 | slinging- & pulling device (2pcs = 1 pair), SALZGITTER, heavy version, for example for flange casings | |
| 608 | annular finger-bit, Ø 460 mm with hexagonal connection 130 mm | |
| 609 | annular finger-bit, Ø 460 mm with kelly box 110 x 110 mm | |
| 627 | auger, Ø 220 mm with hexagonal connection 75 mm | |
| 2365 | core bit, two-part, consisting of holder and plugged on drill bit with 4 cutter bits. Ø drill bit = ap. 155 mm, Ø over flaps = ap. 203 mm. | little used, cutter bits unused |
| 1855 | 1 pc. hexagonal adaptor 70 mm on squares 85 mm, manufacturer unknown, length ap. 615 mm | good, ready to use |
| 1856 | 1 pc. hexagonal connector 70 mm, manufacturer unknown, length ap. 510 mm | good, ready to use |
| 2355 | Driving- / adapter plate for rotary head, with hex. socket 80 mm + 4 pcs. driving lugs | good, ready to use |
| 2356 | Driving- / adapter plate for rotary head, with hex. socket + pin 80 mm + 4 pcs. driving lugs | good, ready to use |
| 1583 | 1 pc. transfer car for armouring basket, LxWxH = ap. 5000 x 800 x 600 mm | good |
| 1634 | 1 centring device for columns, Ø 1.300 mm, manufacturer unknown, system PD-Switzerland | very good |
| 1635 | 1 centring device for columns, Ø 1.300 mm, manufacturer unknown, system PD-Switzerland | very good |
| 1636 | 1 centring device for columns, Ø 1.180 mm, manufacturer unknown, system BAUER/LEFFER | good |
| 1637 | 1 centring device for columns, Ø 1.180 mm, manufacturer unknown, system BAUER/LEFFER | good |
| 1638 | 1 centring device for columns, Ø 900 mm, manufacturer unknown, system CASAGRANDE | very good |
| 1639 | 1 centring device for columns, Ø 900 mm, manufacturer unknown, system CASAGRANDE | very good |
| 2273 | 1 swivel / twist catcher, with grease nipple and fork head on both sides. Outer Ø ap. 120 mm, length of all ap. 410 mm. Load ap. 7.300 kg. | good |