Continuous flight augers
| ID-No (more details and pictures) |
OUTSIDE-Ø mm |
MANUF. / TYPE |
ELEMENTS | NOTE |
| 1292 | 750 | DIVERS | 1 x 10,5 // 1 x 4,3 // 1 x 1,25 // 1 x 0,75
Total length 16,8 m |
Hexagonal connection 140, flight thickness 30 mm, pitch 550 – 410 mm, A-tube 203 mm |
| 1061 | 750 | ABI | 2 x 1 // 1 x 1 + 1 x 0,55 pilot coupled + 1 m extension. Total length 4,55 m | Square connection 60x60 mm each with 2 screws, flight thickness = 8 mm, pitch = 360 mm |
| 1060 | 600 | ABF | 1 x 4 // 1 x 3 // 2 x 2 // 2 x 1 // 1 twister 0,47 m. Total length 13,47 m |
Per connection 2 wide cams, 4 conical screws + 1 o-ring (partial displacement augers) |
| 1362 | 600 | DIVERS | 2 x 7,0 // 1 pilot 1,9 with new teeth
Total length 15,9 m> |
Hexagonal connection 190, inner diameter concrete tube 125 mm |
| 1071 | 580 | ABI | 1 x pilot 0,2 m for rock // 1 x 1,5 m // 3 x 2 m. Total length 7,7 m |
Hexagonal connections 70, flight thickness = 10 mm, pitch = 280 mm, A-tube = 100 mm |
| 1074 | 460 | ABI | 1 x 2 m | Hexagonal connections 70, flight thickness = 12 mm, pitch = 300 mm, A-tube = 100 mm |
| 1549 | 440 | DIVERS | CFA Ø 440 mm with tube Ø 210 mm, incl. down-the-hole hammer: Hexagonal connection 150 mm with O-ring sealing; flight thickness 20 mm, pitch 325 mm 1 x 10’350 mm, one side with male coupling, other side with flange Ø 300 mm for the connection of the DTH-hammer. The flights are partially doubled up to approx. Ø 300 mm. 1 x 4’750 mm with male- and female coupling 1 x 5’820 mm with both sides male coupling 1 x 1’950 mm, starter element with installed down-the-hole-hammer HALCO Mach 80 and 2-step drill bit for drilling Ø 440 mm, at the other side with flange Ø 300 mm (for connection with the element of 10’350 mm length) 1 x 1’720 mm, extension without flights with male- and female coupling, tube Ø 180 mm CFA Ø 290 mm with tube Ø 140 mm: Hexagonal connection 150 mm with O-ring sealing; flight thickness 12 mm, pitch 160 mm 1 x 9’100 mm, one side with hexagonal male coupling, other side with conical female thread 1 x 1’950 mm, Ø 440 mm (can easily be modified to Ø 290 mm) – starter tube for installing of the DTH-hammer Accessories for down-the-hole hammer HALCO Mach 80: 1 pc. drill bit for Ø 650 mm, flat 1 pc. 2-step drill bit Ø 260 and 470 mm 1 pc. drill bit for Ø 450 mm, flat, without adapter collar for DTH-hammer 1 pc. drill bit for Ø 450 mm, flat, with adaptor collar for DTH-hammer 1 pc. drill bit for assembling to 2-step drill bit, Ø 260 mm 1 pc. drill bit for assembling to 2-step drill bit, Ø 450 mm 1 pc. drill bit for assembling to 2-step drill bit, Ø 260 mm 1 pc. drill bit for assembling to 2-step drill bit, Ø 450 mm 3 pc. centre shaft for assembling bits, with threaded lower part, conical seat for upper bit and mounting end (connection to DTH-hammer) 4 pc. adaptor collar for the connection of drill bit to the DTH-hammer |
|
| 1075 | 380 | ABI | 1 x 2 m // 1 x Pilot 0,3 Gesamt 2,3 m |
Hexagonal connections 70, flight thickness = 10 mm, pitch = 240 mm, A-tube = 100 mm |
| 405 | 250 | BAUER | cleaning bucket for FOW system | |
| 406 | 160 | DIVERS | Each 1 element of 5 + 2 m, 1 drilling head for rock 0.35 m with 4 rock bits | Hexagonal connection 40 mm, as new. |
| 407 | 145 | DIVERS | 3 elements of 2 m, 1 of 1,4m length and 1 extension of 1 m, 1 drill head | Hexagonal connection 70 mm |
| Accessories for CFA available: | Drill heads, pilots, adapters, hydr. cylinders etc. | |||
| 1582 | DIVERS | 1 pc. cardan joint, connection on both sides, hexagonal connections 70 mm, total length ap. 600 mm | good, rusty | |